Our system detected that your browser is blocking advertisements on our site. Please help support FoxesTalk by disabling any kind of ad blocker while browsing this site. Thank you.
Jump to content
Captain...

Restart Project

Recommended Posts

Posted

Something positive for a change:

 

http://www.bbc.co.uk/news/technology-22796798

 

On a warm summer's night they came, bearing the damaged and broken, to the place where old things are healed and made whole again.

This time they came to the Camden Town Shed, in north London, but next time it could be a church hall, market stall or community centre near you.

Ugo Vallauri and Janet Gunter are the co-founders of The Restart Project, which aims to stop people throwing away broken gadgets and other electrical items and, instead, get them fixed by taking them along to a Restart party.

At these gatherings, damaged and broken devices and gadgets are taken apart, and hopefully repaired, by the teams of fixers that the project brings together.

The idea came out of work Mr Vallauri has done with Computer Aid, a charity that refurbishes old computers for use in developing nations.

"They fix almost everything in those places," he said, "they just don't have the money to buy them new."

By contrast, he said, in developed nations people have lost the will to fix broken gadgets. A combination of convenience and cultural pressure leads people to buy new rather than repair.

"Also people have lost trust in commercial repairs. They do not know who to go to and who they can trust, especially when it comes to electronics and electrical goods."

The idea with Restart is to overcome that fear by getting people involved with the repair process themselves.

Opening up a kettle, coffee grinder or laptop and helping to take it to pieces is a powerful way to get over that fear, said Ben Skidmore, one of Restart's roster of regular fixers.

That fear tends to evaporate completely if the item in question gets fixed, he said.

The fixers at Restart parties include people like Mr Skidmore who have been tinkering as a hobby for years, to others such as Francis Dove who runs an electrical repair shop.

When someone walks in to a Restart party with a damaged or broken gadget, it goes through a "triage stage" during which its owner describes the symptoms and people offer their opinions about what's wrong.

Then, more often than not, it is put on a tabletop, taken to pieces and the repair work begins.

"The best technicians are nosy," said Mr Dove, peering at the exposed circuit board of an LCD TV.

Boombox beats again[/size]

On average about 20-25 people bring along something in need of repair to a Restart party, said Mr Vallauri.

_68048536_tv017687594.jpg

About a quarter of electrical and electronic waste will work again

In Camden, the fixers got to grips with, amongst other things, an LCD TV, a boombox, a digital car radio, a laptop, two digital cameras and a pair of headphones.

On the night some, such as the boombox, were easy to fix. The boombox's radio tuner looked broken, but when the case was cracked open it emerged that the piece of plastic that moves when the tuning wheel is turned had simply slipped out of sight.

In moments, it was returned to its track and the repair was done.

Others were trickier. Mr Dove instantly spotted dodgy capacitors on the circuit board of the LCD TV that were responsible for putting it into an eternal standby mode. Ripping them out and replacing them should solve the problem, he said.

For Mr Vallauri, the failing capacitors are symptomatic of the way modern electrical equipment is built. Manufacturers could choose to use components that cost a fraction more and radically lengthen the life of the average gadget, he said.

Instead, he said, more often than not they go cheap and produce goods that have obsolescence built in.

Fixing items that suffer this manufacturing neglect is straightforward even though few people know it. Mr Vallauri quoted research which suggests that about 23% of the waste electrical equipment in recycling centres could be refurbished and repaired easily.

Unlocking the value in that could prove a huge boost to local economies in financial and social terms, he said.

Unfortunately, he said, that value is hard to realise because most recycling policies involve local authorities signing a deal with a contractor to manage the waste.

That divorces people from being involved with what they discard, said Mr Vallauri. The undoubted convenience comes at a high social cost.

Getting between the authority and the waste management firm is hard, he said, but would reap real dividends.

"We don't like it when we see things that end up in a skip, or even recycled by our councils, when they could have a second or third life if only we use some basic repair skills," he said.

It just sounds like such a brilliant idea, we waste so much that can still be used, would love to see this really take off.

The restart project website: http://therestartproject.org/

Posted

Sounds good. I have no idea who I can trust with something like laptop repair. Those dodgy shops which sit along side kebab shops and usually have masses of mobile phone cases on the walls are the only places I see which advertise laptop repair, and I have no idea as to their credentials. They seem more likely to be fronts for illegal operations than actual viable businesses. I took a laptop to one of them once and they seemed shocked to get a real customer. There was a sense of inevitability about the way their expensively priced repair job failed after less than a week. I don't want to send a laptop back to a manufacturer either because sending it off is very impersonal and I have no real idea who is doing what with my laptop while its gone.

Posted

The article lost all credibility within the first sentence.

 

"On a warm summer's night"....Bullshit.

Ha ha, trust you to find a problem with it.  :thumbup:

Posted

It's not a bad idea. It's amazing how much can be repaired that gets chucked away. I've repaired the dishwasher, oven and washing machine before. If you know how various appliances work then you can fix them pretty easily, tends to boil down to diagnosing the offending part, ordering it in and replacing it.

 

I did think of whether it would be a viable business but i don't think it can be really. It only really works out if your customers are coming to you because they like their electrical goods and prefer them fixed rather than buying new, but that dosn't really happen. Otherwise the price of most things is such that people will simply take the easy option of replacing and those who are poor will not be able to afford to pay for repairs either.

Posted

Thought this was gonna be a thread about the Mandaric years at lcfc

Posted

Something positive for a change:

 

http://www.bbc.co.uk/news/technology-22796798

 

It just sounds like such a brilliant idea, we waste so much that can still be used, would love to see this really take off.

The restart project website: http://therestartproject.org/

 

You do realise the selfish actions of these people could bankrupt China which in turn could lead to social unrest and unemployment , which in turn could lead to a first strike nuclear attack from them ? This whole thing has not been sufficiently thought out. 

 

Restart my Arse. :dunno:

Posted

You do realise the selfish actions of these people could bankrupt China which in turn could lead to social unrest and unemployment , which in turn could lead to a first strike nuclear attack from them ? This whole thing has not been sufficiently thought out.

Restart my Arse. :dunno:

I will not restart your arse, and I'm sick of you asking me.

If stopping wasting thousands of tonnes of electronic equipment does affect China's or anyone else's economy, so be it, their economy is only such good shape as they make such shoddy goods that we have to replace them every year.

Posted

I will not restart your arse, and I'm sick of you asking me.

If stopping wasting thousands of tonnes of electronic equipment does affect China's or anyone else's economy, so be it, their economy is only such good shape as they make such shoddy goods that we have to replace them every year.

 

My post was tongue in cheek. Please feel free to stick your tongue between my cheeks . :thumbup:  :D

Posted

was dropping stuff of at local dump 2 years ago when i noticed a 32" LCD TV. so came back later, told a little lie and got my hands on it.... got it home turned it on it worked, but the backlight kept turning off after a while, opened it up and it turned out to be, on this model the backlight driver board, uses the screws that hold the board in place as a ground. after the tv had warmed up the contacts would break... tightened up the screws and its been working perfectly ever since

 

free tv \o/

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...